• Base cabinet with 2 doors, 5 drawers and 1 adjustable shelf
• 1 desk & 1 stainless steel sink with chrome faucet set
• Easy-clean, all laminate surfaces
• Cabinets ship as one unit, desk ships separate
• All holes are pre-drilled and all hardware is provided to connect the desk to the cabinet
  
• Drawers with metal sides hold up to 75 lbs.
• Concealed, soft-close, door hinges
• 3.25" backsplash included with top
• All sink openings are pre-cut in tops for easy installation
• Satin finish pulls
• Choice of solid or woodgrain laminates for cabinets and desk
• Countertop included. Choice of 6 countertop laminate
• Customizable with options
• Sink location and layout as shown unless otherwise specified

IMPORTANT NOTE: Desk can be position on either left or right side of the cabinet. Please indicate which side you prefer. If no preference is given, the unit will be manufactured and shipped as pictured.

Sink Dimensions

• Base cabinet with 6 doors, 3 drawers and 3 adjustable shelves
• Easy-clean, all laminate surfaces
• Tough, chip resistant edges
• Units are pre-assembled to save installation time
• Fully adjustable, soft-close hinges
• 3.25" backsplash included with top
• Smooth glide drawers with one-piece metal sides hold up to 75 lbs
• Satin finish pulls
• Choice of solid color or woodgrain laminates for cabinet
• Choice of 6 countertop laminates
• Countertop included. Choice of 6 countertop laminate
• Customizable with options

Relocate doors and drawers to accommodate optional sink (choose left, right or center sink location)

• Features an easy-clean, one-piece top
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" (5 cm) ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

• Features easy-clean, 30" wide, one-piece top
• 600 lbs. (272 kg) load capacity under normal use
• Easy-clean, ABS plastic enclosed lift
• Smooth, electric, raise and lower height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Heavy duty, steel frame is fabricated in the USA by Clinton Industries
• Dependable scissors-lift features an H-leg design for extra stability
• Rounded corner 1" plywood top with 2" of ultra firm padding covered by heavy weight upholstery
• Harden steel bolts and self lubricating pivot bearings for years of dependable service

• Pneumatic backrest is adjustable from either side and raises
  80 degrees from flat
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" (5 cm) ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

• Drop Section is adjustable from either side and lowers up to 80 degrees from flat
• Standard drop section has nose hole, but it may be ordered without a nose hole (Please specify when ordering)
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" ( 5 cm) ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

• Features easy-clean, 30" wide top with adjustable backrest which is adjustable from either side and raises 80 degrees from flat
• 600 lbs. (272 kg) load capacity under normal use
• Easy-clean, ABS plastic enclosed lift
• Smooth, electric, raise and lower height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Pneumatic backrest cylinder is mounted internally
• Full width backrest hinge adds rigidity for greater support
• Heavy duty, steel frame is fabricated in the USA by Clinton Industries
• Dependable scissors-lift features an H-leg design for extra stability
• Rounded corner 1" plywood top with 2" of ultra firm padding covered by heavy weight upholstery
• Harden steel bolts and self lubricating pivot bearings for years of dependable service

• Pneumatic backrest is adjustable from either side and raises 80 degrees from flat
• Drop section is adjustable from either side and lowers 80 degrees from flat
• Standard drop section has nose hole, but it may be ordered without a nose hole (Please specify when ordering)
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

• Pneumatic backrest is adjustable from either side and raises 80 degrees from flat
• ClintonClean™, Solid Plastic Surface, leg rest is adjustable from either side and lowers up to 80 degrees from flat
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" ( 5 cm) ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

• Pneumatic backrest is adjustable from either side and raises 80 degrees from flat
• Footrest is adjustable from either side and lowers up to 80 degrees from flat
• Retractable, 2-position, adjustable stirrups
• Easy-clean, ABS plastic enclosed lift
• Electric power height adjustment with foot control
• Ultra-strong, uni-frame base and top construction
• Heavy duty, all welded, lift mechanism
• Durable gray powder-coated steel frame
• Self-lubricating pivot points
• Smooth 110 volt electric height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Hands-free low voltage foot control
• Easy service, self contained, electrical components
• Seamless, rounded corner, upholstered top
• 2" (5 cm) ultra-firm padding
• Customize with options
• Made in the USA by Clinton Industries
• 500 lbs. (227 kg) lift capacity under normal use
  

Power up your exam room in no time with a complete exam room that’s one of the most affordable in its class. Clinton’s Power Ready Room highlights a dependable power treatment table and our latest in upscale casework along with other essentials to complete the space —all at a sharp package price.

Save time and save money with this inclusive, exclusive offer from Clinton!

(no model substitutions, your choice of Clinton Fashion Finishes, countertop colors and upholstery colors)

• 81360 in your choice of upholstery colors

• 8348 Wall Cabinets in your choice of Arctic White or Metropolis Gray Fashion Finishes

• 8648-022 Base Cabinets in your choice of Arctic White or Metropolis Gray Fashion Finishes with stainless steel sink and chrome faucet set included (choose right or left location or no sink. If no location is selected, sink will be placed as shown.)

• Choice of 6 colors of countertop laminate

• 2135 five-leg, pneumatic stool in your choice of upholstery colors

• GS-3000 Single, Stainless Steel,* Glove Box Holder

• TR-20W 20-Quart, Medium Round, White, Waste Receptacle

• C-40B Premium, Padded, Side Chair in your choice of upholstery colors

* Not MRI compatible

• Features easy-clean, 30" wide top with adjustable backrest and drop section
• Standard drop section has nose hole, but it may be ordered without a nose hole (Please specify when ordering)
• 600 lbs. (272 kg) load capacity under normal use
• Easy-clean, ABS plastic enclosed lift
• Backrest adjusts from either side and raises 80 degrees from flat
• Drop section adjusts from either side and lowers up to 80 degrees from flat
• Smooth, electric, raise and lower height adjustment
• Power supply and motor meets UL 60601-1 and CAN/CSA C22.2 601.1
• Pneumatic backrest cylinder is mounted internally
• Full width backrest hinge adds rigidity for greater support
• Full width backrest hinge adds rigidity for greater support
• Heavy duty, steel frame is fabricated in the USA by Clinton Industries
• Dependable scissors-lift features an H-leg design for extra stability
• Rounded corner 1" plywood top with 2" of ultra firm padding covered by heavy weight upholstery
• Harden steel bolts and self lubricating pivot bearings for years of dependable service